Automatic Oil Press Machine Commercial Expeller Presser Extractor 750W Home Use

Description

WELCOME TO OUR STORE
Topower
Your Best Online Business Partner
Automatic Oil Press Machine Commercial Expeller Presser Extractor 750W Home Use
WELCOME TO OUR STORE
Instruction for Careful Use
Step 1:
Install the press chamber, press rod and hopper
Step 2:
plug in the power, and the fan will operate automatically, but the preheating and pressing will not start. When the master switch is turned on, the fan and preheating will start simultaneously
Step 3:
Open the red button to preheat the press chamber (do not feed inside the hopper during preheating, and preheat the empty machine;
Do not install slag guide elbow during preheating;
Hot keys should be kept open during pressing.)
Step 4:
Start the press
★
When starting the press, start the press rod to rotate first, and then put the raw materials.
Do not fill the hopper at one time, should first put a small amount of raw materials to try to press, lubricate the press chamber press rod, do not fill the hopper at one time.
★
After observing that the oil slag is normal, start to put in a large number of raw materials
Step 5:
Clean the machine after the press is finished
★
Turn off the heating switch (red switch)
★
Turn on the switch downward, and the machine can be cleaned in reverse for 30 seconds (black switch)
★
Remove the hopper, lift the front cover and cool for a few minutes
★
Put on heat insulation gloves, remove the press bar from the chamber, and clean with clean water
Note
All machines support cold pressing and hot pressing mode, but many customers misunderstand that cold pressing mode does not require preheating. This is incorrect.
The cold pressing of our oil press refers to raw pressing of the material, and the hot pressing refers to the heated pressing of the material. Whether cold pressing or hot pressing, the chamber of the machine pressing must be heated to 180°-240° to ensure smooth oil output.
About the temperature setting
Normal temperature 200° : suitable for pressing most raw materials, such as rapeseed, black sesame, soybean, etc
High temperature 230-240° : suitable for pressing peanuts, sunflower seeds with shells, camellia seeds, cooked sesame;
Low temperature 160-180° : suitable for pressing walnut kernel, almond, flaxseed and other health oil;
Several factors affecting the temperature of the pressing chamber:
★
The heating block does not fit with the pressing chamber: before preheating, the front cover is laid down to check whether the heating block fits with the pressing chamber completely. If the fitting is not tight, the pressing chamber will not be heated, leading to the pressing problem;
★
Installation of slag guide tube: too much installation of slag guide tube will jack up the heating block, resulting in the separation of the heating block and the press chamber, so that the press chamber can not be heated;
★
long pressing time, heating can not keep up with the pressure chamber temperature drop, showing a sudden slag spraying phenomenon, then you can press the reverse key for about 30 seconds, let the temperature of the chamber rise, and then start pressing (can not directly stop and run again, when the machine stops the oil in the chamber will be baked, resulting in blockage)
Special Events
★
The newly squeezed oil contains protein, which is not suitable for direct stir-frying. It needs to be naturally left standing for more than 24 hours to clarify.
★
the press speed will be different due to the size of the material particles, generally the larger the particle feeding speed is slower;
As for the oil yield, the data we provide is laboratory data. The actual oil yield will vary due to different material quality, different producing area and different degree of dryness. It is not completely determined by the machine.
If you want a high oil yield, you need to buy professional raw materials for oil extraction (we use our own peanut experiment, using 3Kg peanut, 1.25kg oil extraction, oil extraction rate up to 41%)
Item Specifics
UPC
Does not apply
Power Type
Electric
Brand
TPBP
Model
Oil press
MPN
167457-TT
Material
Stainless Steel 304
Bundle Description
Safe
Country/Region of Manufacture
China
Color
Silver
Product Type
Temperature control
Payment
1.We accept payment via PAYPAL only.
2.Payment must be made within 4 days of auction closing.
3.S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
Shipping
1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
3.We ship to US ONLY.
4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.
Warranty
1.All of our brand new items come with a 30-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described,It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping & handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
Contact Us
We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications.
We are trying every effort to answer your questions and inquiries in a timely manner..
Please note that our office is closed during weekend and holidays.If you dont receive our response within 12 business hours window, please contact us again,If still no response, most times it is because your email did not go thru successfully or you sent to the wrong email address. Please keep in mind that by no means we would ignore your emails and not respond on purpose.
Topower
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Automatic Oil Press Machine Commercial Expeller Presser Extractor 750W Home Use
WELCOME TO OUR STORE
Instruction for Careful Use
Step 1:
Install the press chamber, press rod and hopper
Step 2:
plug in the power, and the fan will operate automatically, but the preheating and pressing will not start. When the master switch is turned on, the fan and preheating will start simultaneously
Step 3:
Open the red button to preheat the press chamber (do not feed inside the hopper during preheating, and preheat the empty machine;
Do not install slag guide elbow during preheating;
Hot keys should be kept open during pressing.)
Step 4:
Start the press
★
When starting the press, start the press rod to rotate first, and then put the raw materials.
Do not fill the hopper at one time, should first put a small amount of raw materials to try to press, lubricate the press chamber press rod, do not fill the hopper at one time.
★
After observing that the oil slag is normal, start to put in a large number of raw materials
Step 5:
Clean the machine after the press is finished
★
Turn off the heating switch (red switch)
★
Turn on the switch downward, and the machine can be cleaned in reverse for 30 seconds (black switch)
★
Remove the hopper, lift the front cover and cool for a few minutes
★
Put on heat insulation gloves, remove the press bar from the chamber, and clean with clean water
Note
All machines support cold pressing and hot pressing mode, but many customers misunderstand that cold pressing mode does not require preheating. This is incorrect.
The cold pressing of our oil press refers to raw pressing of the material, and the hot pressing refers to the heated pressing of the material. Whether cold pressing or hot pressing, the chamber of the machine pressing must be heated to 180°-240° to ensure smooth oil output.
About the temperature setting
Normal temperature 200° : suitable for pressing most raw materials, such as rapeseed, black sesame, soybean, etc
High temperature 230-240° : suitable for pressing peanuts, sunflower seeds with shells, camellia seeds, cooked sesame;
Low temperature 160-180° : suitable for pressing walnut kernel, almond, flaxseed and other health oil;
Several factors affecting the temperature of the pressing chamber:
★
The heating block does not fit with the pressing chamber: before preheating, the front cover is laid down to check whether the heating block fits with the pressing chamber completely. If the fitting is not tight, the pressing chamber will not be heated, leading to the pressing problem;
★
Installation of slag guide tube: too much installation of slag guide tube will jack up the heating block, resulting in the separation of the heating block and the press chamber, so that the press chamber can not be heated;
★
long pressing time, heating can not keep up with the pressure chamber temperature drop, showing a sudden slag spraying phenomenon, then you can press the reverse key for about 30 seconds, let the temperature of the chamber rise, and then start pressing (can not directly stop and run again, when the machine stops the oil in the chamber will be baked, resulting in blockage)
Special Events
★
The newly squeezed oil contains protein, which is not suitable for direct stir-frying. It needs to be naturally left standing for more than 24 hours to clarify.
★
the press speed will be different due to the size of the material particles, generally the larger the particle feeding speed is slower;
As for the oil yield, the data we provide is laboratory data. The actual oil yield will vary due to different material quality, different producing area and different degree of dryness. It is not completely determined by the machine.
If you want a high oil yield, you need to buy professional raw materials for oil extraction (we use our own peanut experiment, using 3Kg peanut, 1.25kg oil extraction, oil extraction rate up to 41%)
Payment
Shipping
Warranty
Contact Us
1.We accept payment via PAYPAL only.
2.Payment must be made within 4 days of auction closing.
3.S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
3.We ship to US ONLY.
4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.
1.All of our brand new items come with a 30-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described,It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping & handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
We fully understand how critical it is to keep communications as smooth and quick as possible. Many issues could be resolved by themselves thru well communications.
We are trying every effort to answer your questions and inquiries in a timely manner..
Please note that our office is closed during weekend and holidays.If you dont receive our response within 12 business hours window, please contact us again,If still no response, most times it is because your email did not go thru successfully or you sent to the wrong email address. Please keep in mind that by no means we would ignore your emails and not respond on purpose.
All rights reserved.